REBAR BENDING MACHINES

STANDARD EQUIPMENT DETAILS

Three bush holding pins in special hardened and cemented steel, to be positioned on the working top together with bushes, with the function to support the effort coming from the phase of bending;

A stirrup bending pin in special cemented and hardened steel, to be positioned on the turning plate for the production of stirrups, as it permits to obtain small curving radii. Can be used with bars up to Ø12mm;

A square pin, to be used with the checking block, to counteract and annul the effort exercised by the bending on the checking block;

A checking block, indispensable to correctly direct the rod on the working top and loosen the effort exerted on the bar in the previous point to the bending point, thus avoiding possible deformations of the rod. Can be used with bars up to Ø 20mm;

A set of bushes, studied in detail for each bending machine model. The width of the bush positioned on the central hole of the plate corresponds to the bending radius. To use bars from Ø15mm on, it’s important that the diameter of the bush is at least 3 times bigger compared to the diameter of the rod to be bent.

Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending;

An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine;

A plug to be inserted into a complementary socket.

Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;

These switches are used to stop machines and facilities in emergencies. The access door to the internal compartment has a safety microswitch which stops the machine if it is opened.

A set of Allen keys, for ordinary maintenance;

Standardly mounted on all Evo Bending Machines, long saddles – with max. 10 holes – are indispensable to realize the double bending.

A set of wheels, for the machine handling;

Guard with microswitch. (Standard dotation for UE Version).

Use ropes or chains of sufficient strength for the model to be lifted, using hooks in the holes or the eye bolts, depending on the version ordered.

- Socket for pedal (White Color)
- Socket for power (Red Color)

Master switch, powers and disconnects the machine.

Central plate rotation direction selector.

White illuminated button indicating power on.

Continuous pressure safety button: the button must be constantly pressed to allow rotation. The rotation stops immediately if the button is released.
When the point of reversing the rotation is reached the return movement is automatic.
The control pedal operates in the same way as this button.

The button controls the return of the central plate to the zero point of the rotation.